Verschillen

Dit geeft de verschillen weer tussen de geselecteerde revisie en de huidige revisie van de pagina.

--- nas_cdnas [2014/11/11 16:23] – pvi
+++ nas_cdnas [Ongeldige datum] (huidige) – verwijderd - Externe bewerking (Ongeldige datum) 127.0.0.1
@@ Regel 1: / Regel 1: @@
-==== Synology NAS ====
-===FTP passive mode===
-[[http://forum.sp.parallels.com/threads/plesk-12-backup-personal-ftp-repository-error.305643/|plesk-12-backup-personal-ftp-repository-error]]\\
-Finally, after some tcpdumps, I found the reason why I could list files, but plesk couldn't connect.
-When you see traces, plesk connects to FTP, but make some tests to check all is OK. One of this checks is to send a SYN packet to the Passive Port given by FTP in Entering Passive Mode packet. When you list files with curl, you donÂ´t test if you can reach to passive port. You enter in passive mode, but you just send the list command to port 21. You don't use passive port.
-But now the tricky. It happens with some FTP servers, like mine, that are not clever: you configure default passive ports (55536-55539), but then in Entering Passive Mode packet, offers a port outside this range, normally a port like 550XX (55002, 55003, 55004,...).
-So the solution was simple: set passive port range from 55000-55539 (and in my case, nat in router from 55000-55539 to my ftp server, and port 20-21, obviously).
-===IP===
-Zie Keepass voor info
-===Login===
-via ssh, zie Keepass\\
-via browser https://ipadress:5001 of https://dnsnaam:5001
-===Command line===
-[[http://forum.synology.com/wiki/index.php/Basic_commands_to_get_around_the_Synology_Box_using_the_CLI|Synolog CLI commands]]\\