Verschillen

Dit geeft de verschillen weer tussen de geselecteerde revisie en de huidige revisie van de pagina.

--- geo_factory-reset [2017/08/02 18:10] – pvi
+++ geo_factory-reset [Ongeldige datum] (huidige) – verwijderd - Externe bewerking (Ongeldige datum) 127.0.0.1
@@ Regel 1: / Regel 1: @@
-Master Reset Dakota
-There are a few instances in which you may want to perform a master reset on your Dakota, such as:
-    not receiving a satellite signal
-    want to restore the factory default settings
-    not functioning properly
-All settings, user data*, and satellite data may be erased when resetting the GPS. User data can be backed up to the computer, therefore refer to related content before performing the reset.
-To perform the master reset:
-    Power the device off
-    Press and hold your finger on the upper left side of the display
-    Power the device on while still maintaining pressure on the display
-    Release on the display when the Do you really want to erase all user data? message appears
-    Touch Yes
-The Dakota is now reset. You will want to leave the device outside with a clear view of the sky for a minimum of 20 minutes to acquire satellite data.
-*User data consists of waypoints, routes, tracks, and geocaches
---Optie 2-------------------
-Insert the usb cable in in the Dakota, ONLY DAKOTA.
-Push the on button and keep pushing
-Still while pushing insert the usb to the computer
-After about 30 seconds release the on button.
-It should work by now.
-If your computer sees the dakota, with windowd explorer remove all gpx files. (save the on the HD)